|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MASW-000822-1277OT HMICTM PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Features * Exceptional Broadband Performance * Suitable for Higher Power WiMax & WLAN Applications * Lower Loss: Tx = 0.40 dB @ 3.8 GHz, 22mA Rx = 0.60 dB @ 3.8 GHz, 22mA * Higher Isolation: Rx-Tx = 21 dB @ 3.8 GHz Tx-Rx = 26 dB @ 3.8 GHz * Higher RF Input Power = 10 W C.W. ( Tx-Ant Port ) * Higher IIP3 = 65 dBm ( Tx-Ant Port ). * Lower EVM (OFDM): < 1.0% @ 8W Pin, ( Tx-Ant Port ) * Lead-Free 3 mm 16-Lead PQFN Package * 100% Matte Tin Plating over Copper * Halogen-Free "Green" Mold Compound * RoHS* Compliant and 260C Reflow Compatible Rev. V6 Functional Schematic Pin Configuration 1 Pin Function N/C N/C Tx N/C N/C N/C N/C N/C Pin 9 10 11 12 13 14 15 16 Function N/C Rx N/C N/C N/C Ant N/C N/C 1 2 3 4 5 6 7 8 Description MA-COM's MASW-000822-12770T is a Broadband, high linearity, common anode PIN diode SPDT switch in a lead-free 3 mm 16-lead PQFN package. The MASW-00822-1277OT is ideally suited for 0.05 - 6.0 GHz applications, including WiMax & WLAN. This SP2T switch offers excellent isolation to loss ratio for both Tx and Rx states. The PIN diode provides exceptional 10 W C.W power handling coupled with 65 dBm IIP3 for maximum switch performance @ 3.8GHz. This MASW-000822-1277OT incorporates a PIN diode die fabricated with M/A-COM's patented Silicon-Glass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. 1. The exposed pad centered on the package bottom must be connected to RF and DC ground. Ordering Information 2 Part Number MASW-000822-1277OT MASW-000822-001SMB Package 1000 piece reel, 7 inch Sample Board 2. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000822-1277OT HMICTM PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Electrical Specifications: TA = 25C, PIN = 0 dBm, Z0 = 50 Parameter Insertion Loss, Rx Conditions Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA 2.3 - 2.7 GHz 3.3 - 3.8 GHz 4.9 - 5.9 GHz Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA 2.3 - 2.7 GHz 3.3 - 3.8 GHz 4.9 - 5.9 GHz Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA 2.3 - 2.7 GHz 3.3 - 3.8 GHz 4.9 - 5.9 GHz Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA 2.3 - 2.7 GHz 3.3 - 3.8 GHz 4.9 - 5.9 GHz Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA 2.3 - 2.7 GHz 3.3 - 3.8 GHz 4.9 - 5.9 GHz Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA 2.3 - 2.7 GHz 3.3 - 3.8 GHz 4.9 - 5.9 GHz Units dB Min. -- -- -- -- -- -- 27.0 24.5 21.0 22.5 19.5 17.5 -- -- -- -- -- -- Typ. 0.55 0.60 0.80 0.35 0.40 0.50 29.5 26.5 21.5 24.5 21.5 17.5 17 18 18 17 18 18 Max. 0.70 0.75 0.90 0.45 0.55 0.60 -- -- -- -- -- -- -- -- -- -- -- -- Rev. V6 Insertion Loss, Tx dB Isolation, Tx to RX dB Isolation, Rx to TX dB Input Return Loss Tx dB Input Return Loss Rx dB Electrical Specifications: F = 3.5 GHz, TA = 25C, Z0 = 50 3,4,5 Parameter Tx Input P0.1dB Tx Input P1dB Tx 2nd Harmonic Tx 3rd Harmonic Tx Input 3rd Order Intercept Point Tx C.W. Input Power Rx C.W. Input Power Tx EVM (OFDM) Tx EVM (OFDM) Tx RF Switching Speed Conditions Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Tx To Antenna Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Tx To Antenna Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = + 30 dBm Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = + 30 dBm Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = + 10 dBm F1 = 3.500 GHz, F2 = 3.510 GHz Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, F= 4.0 GHz Rx = +5.0 V @ +22 mA, Tx =+12V @ 0 mA, F= 4.0 GHz Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = +39 dBm Tx = +5.0 V @ +22 mA, Rx =+12V @ 0 mA, Pin = +40 dBm ( 10-90% RF Voltage) Tx = +5.0 V@ +22 mA, Rx =+12V @ 0 mA 1MHz Rep Rate in Modulating Mode Units dBm dBm dBc dBc dBm dBm dBm % % ns Min. -- -- -- -- -- -- -- -- -- -- Typ. 40 45 -68 -84 65 -- -- 0.8 1.2 <500 -- -- -- -- -- 40 33 -- Max. 3. Data taken at device RF leads. 4. Typical PIN diode forward voltage = +0.8 V @ 10 mA, +0.85 V @22 mA. 5. Typical PIN diode reverse voltage = +12.0 V 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000822-1277OT HMICTM PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Absolute Maximum Ratings 6 @ TA = +25 C (unless otherwise specified) Parameter Forward Current Reverse Voltage Operating Temperature Storage Temperature Junction Temperature Tx Incident C.W. Power Tx Peak Incident Power Rx Incident C.W. Power Absolute Maximum + 100 mA -100 V -40 C to +85 C -55 C to +150 C +175 C 10 W C.W. 20 W, 3 S P.W., 1% Duty 2 W C.W. Rev. V6 Cross Section View of M/A-Com PCB 6. Exceeding these limits may cause permanent damage. D.C. Bias to RF Truth Table RF State Low Loss Tx-Ant & Isolation Tx-Rx Low Loss Ant-Rx & Isolation Rx-Tx TTL & D.C. Bias Conditions TTL = 1 + 5V @ 22 mA ( Tx ), + 12V @ 0 mA ( Rx ) TTL = 0 + 5V @ 22 mA ( Rx ), + 12V @ 0 mA ( Tx ) Voltage at Common Anode + 0.9 V + 0.9 V Driver and SP2T Schematic with Positive Voltage 7,8,9,10,11 Ant DC Block LBias R5 Bypass 180 +5 V TX DC Block LBias SP2T DC Block RX LBias Bypass Bypass MADR-008888-000100 Logic Input Driver Ground 7. Forward Bias Diode Voltage, Vf @ 22 mA = + 0.9 V. 8. Reverse Bias Diode = | - ( +12 V - +0.9 V ) | = | - 11.1 | V. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000822-1277OT HMICTM PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Typical Performance Curves: TA = 25C, Z0 = 50 Insertion Loss 0.0 Rev. V6 Isolation -15 -20 -25 -0.2 TX RX -0.4 -30 -0.6 -35 -0.8 -40 -45 0.0 TX RX -1.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (GHz) Frequency (GHz) Tx and RX Return Loss -20 TX RX EVM 1.2 1.1 1.0 0.9 SPDT Series T/R Switch System EVM Baseline -25 -30 0.8 -35 0.7 0.6 -40 0.0 0.5 1.0 2.0 3.0 4.0 5.0 6.0 15 20 25 30 35 40 Frequency (GHz) Incident Power (dBm) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000822-1277OT HMICTM PIN Diode SP2T 10 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Tx Diode Junction Temperature vs. C.W. Input Power @ 4.0 GHz , Tj = 175C 350 325 300 275 250 225 200 175 150 125 100 75 50 25 0 Rev. V6 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Max Tj (40.1 dBm) These devices are rated at Class 1B Human Body. Proper ESD control techniques should be used when handling these devices. 20 25 30 IN 35 40 45 P (dBm) This device is not for saturation power application. Exceeding power dissipation maximum rating might result in device failure. Lead-Free 3 mm 16-Lead PQFN Reference Application Note S2803 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MASW-000822-12770T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |